null Skip to main content

GLB SuperSonic

GLB Pool Care

$16.99
$11.99
SKU:
71442A
UPC:
785336714431
Condition:
New
Availability:
Order in By 10 AM CST - Ships Same Day
Shipping:
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Adding to cart… The item has been added

GLB SuperSonic is a highly effective multi-purpose product that sanitizes, clarifies, prevents algae and shock treats your pool. It is convenient, easy to use and won't over stabilize your pool water. The fast-acting formula can be used on all pool surfaces, does not contain cyanuric acid and leaves no residue.

  1. Use Super Charge at the rate of 1 pound per 10,000 gallons of pool water. Add total required amont at one time. Scatter this granular product directly over the pool water surface. Use Super Charge only when pool is not in use. It will produce a temporary high chlorine level. Do not enter pool until the chlorine residual has dropped to a level of 2 ppm as determined by a suitable test kit.
  2. Between Super Charge applications, maintain required 1 - 1.5 ppm chlorine residual in pool water.

Pool Opening: Adjust and maintain pH in the 7.2 to 7.6 range. Follow "Shock Treatment" directions. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.

Shock Treatment: Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.

Algae Control: Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.